Thursday, September 16, 2010


Carpets are generally glued into position along the footwell sides and around the parcel shelf area. The author has tried using non-impact adhesives but found that an impact adhesive was essential.Before re-fitting the pressing which lies under the pedals, check that the pedals are correctly adjusted; that the throttle pedal has a full range of travel (it won't if the hinged base has been welded into the wrong position on a new floorpan), that the brake and clutch pedals both have reasonable amounts of free travel. The pressing itself hooks into two slots on the toeboard and is held by a single self-tapping screw. This and the edges of the footwell side carpet are then covered with the rubber mat.

Popular Posts